Getting the most BANG for your buck.

Getting the most bang for your buck with a CB radio is one thing that most first time operators have on their minds when trying to figure out which radio is the right one for them. CB radios in the United States are ALL type accepted by the F.C.C to certain specifications. That means that they ALL put out the same amount of power and signal. Doesn’t matter whether you spend $30 on a basic radio like the
Uniden Pro505XL or one of the top of the line Galaxy radios. So how can you get the most bang for your buck with a CB radio ?

Ham Radio Coax makes ALL the difference!
uniden pro505xl Basic CB radios like the Uniden Pro520XL will put out just as much power as a more expensive radio with Ham radio Coax and a power microphone

Can you hear me NOW?

Keep in mind that no matter what the manufacturer may claim, CB radios are only allowed to put out a maximum of 5 watts. Unless you start looking at modified Ham radio equipment which has more frequency coverage and power output, you are not going to see or hear much difference between radios. Keep in mind that modified Ham radio (export 10M radios) are illegal for use on the CB and require a license. You can and WILL be caught and fined, and possibly lose your equipment to the men in the White van that have been sitting outside your house for the last few days!

Power Microphones.

One way around this limitation is to use what is called an amplified microphone. Remember, it is also illegal to modify your CB radio internally in any way, but there is NO limitation on microphones.

An amplified mic, or power mic will amplify the audio input of the radio you are using. As long as you don’t crank the amplification up full bore and start causing RFI (Radio Frequency Interference) and scrambling TV’s in the neighborhood you should be fine. Another thing to remember is that when a power microphone is turned up to high, the voice transmission starts to distort and sound very poor. Sure, the audio IS louder, but what good does that do if no one can understand what you are saying. The best way to avoid this without an oscilloscope is to have a friend on the radio help you adjust the amplified microphone until you are loud without distorting. This will go a LONG way in improving your signal while reducing interference.

With Ham Radio Coax and power mic this radio sounds beautiful on the airwaves without distorting the signal
The Radio has just as much output power as a basic Uniden Pro520XL. The Ham Radio Coax and antenna make ALL the difference!

Antenna antenna antenna.

One thing that is interesting is that no matter how much you spend on the CB radio, it is only going to perform as well as the antenna system that you use. I often find that a $5 Garage sale throwaway bargain basement radio will perform just as well as a top of the line radio when connected to my 3 element beam. No noticeable difference in stock radios. You are better off purchasing a inexpensive radio and spending most of your money on a decent antenna and ham radio coax, which has minimal loss per 100ft.

One of the simplest antennas that can be erected is a simple ΒΌ vertical on the roof. With good height and tuned properly this will give good performance.

Vertical antennas like the Antron-99 have a love/hate relationship with most radio operators. They either LOVE them or absolutely HATE them. I have found that in most circumstances the Antron99 will be a decent performer as well.

If you have the money and real estate then a directional beam is the way to go. These can be purchased under $200 bucks and will concentrate your power in the direction you want it. The only drawback to a beam is that it constantly needs to be turned in the direction you want to talk. A beam antenna will also require a little more maintenance than a vertical. The trade-off is much stronger signal OUTPUT and better receive. I find that my beam is quieter than a vertical as well, so I can hear the station I want without all the static.

RF Gain and AF Gain/Volume Control.

One thing that CAN be said for a little more expensive radio is the RF Gain and AF Gain. When the CB bands are REALLY noisy it helps to have an RF gain control. This reduces the incoming noise. When you hear a weaker station you can adjust the RF gain down as the person talks, to a point where the background noise is reduced. This allows you to hear the weaker station. Just don’t turn it down TOO far or the signal you are trying to hear will disappear. The AF Gain/Volume control can then be turned up just a little to bring up the receive audio. It will take a little adjusting to familiarize yourself with this process but once you find comfortable settings it will become second nature to you.

In the older days of radio it was a common practice to turn the AF Gain/Volume all the way up and then adjust the RF gain slowly until the station could be heard. On older Tube gear you will often find these controls.

 

A bit more about Ham Radio Coax.

This radio is not type accepted for use on the Citizens Band and will get you into trouble
This Connex 3300 is an Amateur Radio and is illegal for use on the CB bands.

Amateur Radio operators usually run more power than a CB will put out. This can be up to 1500 watts legal limit. They also have longer runs of Coax that they use for the antenna systems. Because of this, Ham radio coax loss is a big concern. In average RG8 type coax on the Citizens Band (CB) you have loss of about 1.707DB per 100 ft. This means that if your radio puts out 5W, you are getting 3.375 watts out the antenna. At 50ft this loss is reduced to 0.853DB of loss, or about 4.1 Watts output. That is a tremendous loss of power.

Some of the more expensive Ham Radio Coax like LMR400 and will allow 4.32 Watts out at 100 ft. Just remember that it is better to spend more on the antenna and ham radio coax than to spend your entire paycheck on a CB radio that has been modified and illegal for use.

Lets Summarize.

OK, I have babbled now for several minutes about radios, antennas and COAX, so I hope that you get the message. It is better to spend you money on the antenna and Ham Radio Coax than to blow all your money on the radio itself and hope for decent results. So what were the ways you could improve your signal again?

  • Purchase a decent antenna that will improve your output signal.
  • Look for RF Gain and AF Gain with your radio
  • Use high quality Ham Radio Coax.
  • Purchase an amplified Microphone.

OK, I hope this help you get a good signal on the airwaves. Remember that you will have a better signal with a GOOD antenna that with an exotic CB radio.




Find everything you need to setup your first CB radio station at Amazon!

Getting the most BANG for your Buck on the CB radio

Theron


I have a strong passion for all things radio. When I am not writing about different types of radio gear, I am out in the shack working the world on the HF bands, or troubleshooting an older shortwave radio.


Post navigation